Technical

INSTALLATION TORQUE SETTINGS

MODEL TORQUE (kgf-cm)
SEATPOSTS
V3 Splined System Post M6 bolt to 60~70
GRIPS
Combat Grips M4 bolt to 15~25
STEMS
Rippa Clamp: M6 bolt to 58~69 Steerer: M6 bolt to 80~92
Grippa 25.5  Clamp: M6 bolt to 58~69 Steerer: M6 bolt to 80~92
Grippa 31.8 Clamp: M5 bolt to 46~57 Steerer: M6 bolt to 80~92
SMX Clamp: M6 bolt to 58~69 Steerer: M6 bolt to 80~92
Thrilla Clamp: M6 bolt to 58~69 Steerer: M6 bolt to 80~92
Thrilla MX Mini and Expert Clamp: M5 bolt to 46~57 Steerer: M5 bolt to 50~60
Thrilla MX Pro Clamp: M6 bolt to 58~69 Steerer: M6 bolt to 80~92
RSX-25.4 Clamp: M6 bolt to 58~69 Steerer: M6 bolt to 80~92
RSX-31.8 Clamp: M6 bolt to 58~69 Steerer: M6 bolt to 80~92
MZX2-25.4 Clamp: M6 bolt to 58~69 Steerer: M6 bolt to 80~92
MZX2-31.8 Clamp: M6 bolt to 58~69 Steerer: M6 bolt to 80~92
MZX4-25.4 Clamp: M6 bolt to 58~69 Steerer: M6 bolt to 80~92
MZX4-31.8 Clamp: M6 bolt to 58~69 Steerer: M6 bolt to 80~92
CRANKS
Hooka FR 430-480
Hooka DH Left arm M18 bolt to 92~102 Tighten pinth M6 bolt to 80~92
Hooka MX 430-480
Hooka CR 430-480
FUNN BB 430-480

IMPORTANT NOTICE
When Installing your pedals into your FUNN Hooka cranks, please ensure that the inner pedal insert lock ring is fully tightened after installation. This lock ring should be checked every time you remove or install pedals.

HUB BEARING INFO

Bullet front 2 x 6805
Bullet rear 9 speed 4 x 6001
Bullet Singlespeed 1 x CS6802 1 x 6002 1 x 6001A-BF-S
Baby Bertha front 2 x 6804RS
Hura Gura 135mm 4 x 6001
Hura Gura 150mm 12mm bolt thru 4 x 6902
Hura Gura 135mm threaded axle 4 x 6001
Hura Gura 14mm axle single speed 1 x 6902 1 x 6002 3 x 6802